IoT-Technology

SIMPLIFY YOUR MONITORING!

INTELLIGENT MODULAR MEASUREMENT AND TRANSMISSION TECHNOLOGY AND COMPLETE IoT SOLUTIONS FOR ALL COMMERCIALLY AVAILABLE TANKS, FOR VARIOUS METERS AND OBJECTS. EX CERTIFIED AND SAFE.

Use our main-independent Plug & Play solutions, wich can be installed quickly and easily on existing systems, as well as data loggers for recording a large number of sensors. Or you can use our expertise to implement individual monitoring projects, especially when it comes to EX. certified solutions.

TANK MONITORING

LEVELview.LPG for liquefied gas tanks

The level measurement in the LPG tank takes place precisely and without contact using a hall effect sensor, wich is mounted on the flange of the existing float instead of the level indicator. The compact transmitter unit is protected and approved for use in ATEX Zone 1 and may be installed in the dome shaft in the case of underground tanks, under the protective hood or outside of the tank above ground. The sensor and transmitter can be mounted on the tanks quickly and without complex cabling: attach the sensor with 2 screws, place the antenna with the magnetic base, connect the transmitter with the battery pack and done!

TANK-MONITORING

LEVELview.Oil for Oil- & fuel tanks

The level measurement on the oil, diesel and fuel tank is carried out precisely using a hydrostatic pressure probe or a capacitive sensor. The compact transmitter unit is suitable for all commercially available tank shape: vertical or horizontal cylinder, rectangular or battery tank, above and below ground. A suitable free tank opening (diameter at least 1″) is required. The pressure probe or the capacitive sensor can be installed regardless of the fill level, even when the tank is full. Special pressure probes with EXO approval are available for fuels.

TANK-MONITORING

LEVELview.Aqua for Water tanks

The level measurement on water tanks is carried out precisely using a hydrostatic pressure probe or capacitive sensor. The compact transmitter unit is suitable for all commercially available tank shapes: vertical or horizontal cylinder, rectangular or battery tank, above and below ground. A suitable free tank opening (diameter at least 1″) is required. The pressure probe or the capacitive sensor can be installed regardless of the fill level, even when the tank is full.

TANK-MONITORING

LEVELview.MOBILE for mobile barrels and IBC-Tanks with GPS

This robust transmitter unit offers everything in one. level measurement via capacitive cable sensor, temperature detection of the medium as well as the location of the container via GPS and cell IDs. The highlight: the device including the battery pack can be mounted and screwed directly into the tank opening of the container. The data is transmitted worldwide via GSM using an integrated SIM chip. Regardless of where the container is currently on the move, you can keep an eye on all parameters via the App. The unit is certified for use in EX Zone 1/0.

Datenblatt

LEVELview.MOBILE

COUNTER – MONITORING

COUNTERview for Gas counter BK-G2,5 – BG-G100

The COUNTERview transmitter unit simply plugs into the side of the gas meter and records the meter pulses without contact via a reed contact. The device is activated by connecting the attached battery and sends the current data to the “RCTMonitor” platform. There, the value of the counter and the current state of the counter is set as the initial value. The device now count the pulses and transmits them regularly to the RCT web server for a detailed record and control o consumption via the internet. The device can be secured against tampering with a lead seal. It will for example be removed to change the battery or the meter, a motion sensor detects the discharge and send a warming message.

Data sheet
COUNTERview

Data logger REMOTE PROFI GSM

The data logger true all rounder for simultaneous remote monitoring of multiple meters, tank levels, heating circuit temperatures, system faults and much more. It offers 16 channels for recording wired sensors and RCT radio transmitter ( LEVELview.Basic) in a radio range of up to 1.500m. $ meters can be connected with pulse output via cable. Data from all connected radio transmitters and sensors is collected in the data logger and sent to the RCT web server via SMS/GPRS at regular intervals or when definable limit values and alarms are reached. Measured values, meters readings, consumption, alarms and system messages can be monitored at any time via the internet using the “RCTmMonitor” web or mobile App.

Data sheet
Datenlogger

OBJEKT-MONITORING

MULTIview – Mobile Room and property surveillance

The compact, battery operated transmitter can be used quickly and flexibly plug & play anywhere indoors. It monitors movement, temperature, humidity and over 2 alarm contacts, for example power failure or malfunction of the heating system. Status reports with current measured values and alarms for individually definable events will inform you reliably and conveniently in the RCT Monitor App, via push, email or SMS and can act immediately.

Ideal for containers, warehouses and production halls, heating and air conditioning systems, trucks, boat as well as mobile homes, garden houses and holiday homes.

Broschüre
MULTIview

Daten logger REMOTE PROFI GSM

With the data logger you can remotely monitor the entire heating and building technology in a building including the tanks. You receive a well founded database for efficient energy controlling. Problems such as heating failure , unusual consumption, temperature drop, empty tanks are detected at an early stage and enable quick targeted action and minimal downtime.

The data logger offers 16 channels for record wired sensors and RCT radio transmitters, for example for remote monitoring various meters, tank levels, temperatures of the heating circuit, system malfunctions and much more.

The collected data is sent to the RCT web server at regular intervals or when definable limit values and alarms are reached via SMS/GPRS and can be monitored at any time via the internet using the “RCT Monitor” mobile or web App.

Data sheet
Datenlogger

TANK MONITORING SYSTEMS FOR LOCAL AND GLOBAL REQUIREMENTS.

Local level monitoring (up to 1500)

The LEVELview transmitter units record the fill level of the tank and transmit the data locally via radio up to 1,500m (free field) to various RCT receivers for fill level display, integration into technical systems or forwarding.

  • for Liquid gas (Ex1)
    LEVELview.BASIC.LPG
  • for oil, Diesel, fuels (Ex1/0)
    LEVELview.BASIC.OIL
  • for Water
    LEVELview.BASIC.AQUA

Combinable RCT local receivers:
LCD-Display, Interface 4-20 mA

Combinable RCT-receiver for global data forwarding:
WLAN-Empfänger (12 channels for radio transmitter LEVELview.BASIC),
Datenlogger (16 channels for radio transmitter) LEVELview.BASIC, wired meters sensors and contacts.

Global Level monitoring (App)

The LEVELview transmission units record the fill level of various tanks and automatically transmit the data and alarms to the RCT cloud sever using the latest communication technologies via 4G/LTE(old:NB-IoT/SIGFOX/Lora-WAN)

  • for Liquid gas (Ex1)
    LEVELview.PRO.LPG
  • for oil, Diesel, fuels (Ex1/0)
    LEVELview.PRO.OIL
  • for Water
    LEVELview.PRO.AQUA
  • for mobile Tanks, barrels, IBC-container (Ex 1/0)
    LEVELview.MOBILE

Data management:
Web App / Mobile App  „RCT Monitor“
or individual Data management

TANK-MONITORING

LEVELview.LPG for liquid gas tanks

The level measurement on the LPG tank takes place precisely and without contact using a Hall-effect sensor, wich is mounted on the flange of the existing float instead of the level indicator. The compact transmitter unit is protected and approves for use in ATEX Zone 1 and may be installed in the dome shaft in the case of underground tanks, under the protective hood or outside of the tank above ground, The sensor and transmitter can be mounted on the tank quickly and without complex cabling: attach the sensor with 2 screws, place the antenna with the magnetic base, connect the transmitter with the battery pack and done!

TANK-MONITORING

LEVELview.Oil for oil & fuel tanks

The level measurement on the oil, diese and fuel tank is carried out precisely using a hydrostatic pressure probe or a capacitive sensor. The compact transmitter unit is suitable for all commercially available tank shapes: vertical or horizontal cylinder, rectangular or battery tank, above and below ground. A suitable free tank opening (diameter at least 1″) is required. The pressure probe or the capacitive sensor can be installed regardless of the fill level, even when the tank is full. Special pressure probes with ExO approval are available for fuels.

TANK-MONITORING

LEVELview.Aqua for Water tanks

The level measurement on water tanks is carried out precisely using a hydrostatic pressure probe or a capacitive sensor. The compact transmitter unit is suitable for all commercially available tank shapes: vertical or horizontal cylinder, rectangular or battery tank, above and below ground. A suitable free tank opening (diameter at least 1″) is required. Pressure probe or the capacitive sensor can be installed regardless of the fill level, even when the tank is full.

TANK-MONITORING

LEVELview.MOBILE for mobile barrels and IBC-Tanks with GPS

This robust transmitter unit offers everything in one: level measurement via capacitive cable sensor, temperature detection of the medium as well as the localisation of the container via GPS and cell IDs. The highlight: the device including the battery pack can be mounted and screwed directly into the tank opening of the container. The data is transmitted worldwide via GSM using an integrated SIM chip. Regardless of where the container is currently on the move, you can keep an eye on all parameters via the App. The unit is certified for use in EX Zone 1/0.

Datenblatt

LEVELview.MOBILE

COUNTER-MONITORING

COUNTERview for Gas counter BK-G2,5 – BG-G100

The COUNTERview transmitter unit is simply attached to the side of the gas meter and records the meter pulses contactless via a reed contact. The device is activated by plugging in the enclosed battery and sends the current data to the “RCT Monitor” platform. There the value of the counter and the current counter status are set as the start value. The device now counts the pulses and transmits them regularly to the RCT web server for detailed consumption recording and control via internet. The device can be secured against manipulation with a lead seal. It will, for example, if removed for battery or meter change, a motion sensor detects the chock and sends a warning message.

Data sheet
COUNTERview

Data logger REMOTE PROFI GSM

The data logger is a real all rounder for the simultaneous remote monitoring of various meters, tanks levels, temperatures of the heating circuit, system malfunction and much more. It offers 16 channels for recording wired sensors and RCT radio transmitters (LEVELview.Basic) in a radio range of up to 1,500 m. 4 meters with pulse output can be connected via cable. The data from all connected sensors and radio transmitters are brought together in the data logger and sent to the RCT web server via SMS/GPRS at regular intervals or when definable limit values and alarms are reached. The measured values, meter readings, consumption, alarms and system messages can be monitored at any time via the internet using the “RCT Monitor” web or mobile App.

Data sheet
Datenlogger

OBJEKT-ÜBERWACHUNG

MULTIview – Mobile Raum- und Objektüberwachung

Der kompakte batteriebetriebene Sender ist schnell und flexibel plug & play überall in Innenräumen einsetzbar. Er überwacht Bewegung, Temperatur, Luftfeuchte und über 2 Alarmkontakte z. B. Stromausfall oder Störung der Heizung. Durch Statusmeldungen mit aktuellen Messwerten und Alarme bei individuell definierbaren Ereignissen werden Sie zuverlässig und bequem über die RCT Monitor-App, via Push, Mail oder SMS informiert und können sofort handeln.

Ideal für Container, Lager- und Fertigungshallen, Heizungs- und Klimaanlagen, LKWs, Boote sowie Wohnmobile, Garten- und Ferienhäuser.

Broschüre
MULTIview

Datenlogger REMOTE PROFI GSM

Mit dem Datenlogger können Sie die komplette  Heiz- und Haustechnik eines Gebäudes inklusive Tanks fernüberwachen. Sie erhalten eine fundierte Datengrundlage für ein effizientes Energiecontrolling. Probleme wie Ausfall der Heizung, unübliche Verbräuche, Temperaturabfall, leere Tanks werden frühzeitig erkannt und ermöglichen schnelles gezieltes Handeln und minimale Ausfallzeiten.

Der Datenlogger bietet 16 Kanäle zur Erfassung von kabelgebundenen Sensoren und RCT Funksendern, z. B. zur Fernüberwachung von verschiedenen Zählern, Tankfüllständen, Temperaturen des Heizkreislaufs, Anlagenstörungen und vieles mehr.

Die gesammelten Daten werden in regelmäßigen Intervallen oder bei Erreichen definierbarer Grenzwerte und Alarme via SMS/GPRS an den RCT Webserver gesendet und können jederzeit via Internet über die Mobile App oder Web App „RCT Monitor“ überwacht werden.

Data sheet
Datenlogger

DIGITALISIERUNG IHRER TANKS, ZÄHLER UND OBJEKTE – EINFACH, SCHNELL UND FLEXIBEL

Mit 3 Bausteinen zur gewünschten IoT-Lösung:

Sensor + Sender + Empfänger / Datenmanagement

modular | vielfältige Sensoren | stromnetzunabhängig | ex-geschützt

(1) Digitalisieren Sie Ihre Anlagen einfach, schnell und flexibel mit batteriebetriebenen Plug & Play-Modulen, kabelgebunden oder individuell adaptiert. (2) Mit eigens entwickelten oder ausgewählten Sensoren erfassen Sie Tankfüllstände (auch in Ex-Zonen),  Zählerimpulse, Zustände von Anlagen und deren Umgebung. Mit den Sensoren verbundene (3) Transmitter übermitteln die gemessenen Daten und Alarme lokal per Funk (< 1.500 m), mittels WLAN in lokale Netze oder global z. B. via 4G/LTE, NB-IoT, SIGFOX und LoRa-WAN. Lokal übermittelte Tanklevel können einfach an einem (4) Funkdisplay im Büro oder Wohnbereich abgelesen oder via Interface (4-20 mA) in bestehende Anlagen integriert werden. Das globale Monitoring aller Daten erfolgt (5) cloud-basiert über die RCT Monitor App für PC und Mobile Endgeräte oder kann individuell gestaltet werden.

Der (6) RCT-Datenlogger überwacht bis zu 16 verschiedene Objekte und Zustände gleichzeitig. Tanks in Funkreichweite bis 1.500 m integrieren Sie einfach mittels Funksender. Zählerstände, Temperaturen, Drücke, Alarmkontakte und mehr werden gleichzeitig über kabelgebundene Sensoren erfasst. Der Datenlogger verarbeitet alle Daten und übermittelt sie global z. B. via GSM/GPRS für cloudbasiertes Datenmanagement.

RCT setzt bewährte und neueste (7) globale Kommunikationstechniken ein, um Messdaten und Alarme weltweit zur Verfügung zu stellen. Neben Nutzung der RCT-Monitoring-Plattformen können Daten z. B. mittels API-Schnittstellen in bestehende ERP-Systeme eingebunden  und Informationen zielgerichtet verschiedenen Meldestellen zur Verfügung gestellt werden – für (8) optimierte Prozesse und neue datenbasierte Services.

RCT DIGITIZES YOUR WORLDS TANKS COUNTERS OBJECTS

  • DIGITIZE

    make IoThings happen

    Digitalisierung nach Industrie 4.0 – lokal & global, flexibel dank Baukastenprinzip

  • SENSES

    gives senses to things

    Hochwertige Sensorik für Füllstände, Impulse, Drücke, Temperaturen, Feuchte, Bewegung, Alarmkontakte u.v.m.

  • TRANSMIT

    make things speak

    Vielfältige Übertragungstechnologien (RF, WLAN, GPRS, 4G/LTE, NB-IoT, SIGFOX, LoRa-WAN)

  • DISPLAYS

    see what things talk

    Visualisierung der Daten auf Display, Web & App

  • MONITOR

    manage things data

    Verwaltung & Analyse aller Daten via Web/Mobile App oder individuelles Daten Management

  • DATA LOGG

    connect up to 16 things

    Erfassen & verarbeiten von mehreren Funksendern & kabelgebundenen Sensoren mit globalem Datenmanagement

  • GLOBAL

    things data availability

    Alle wichtigen Daten überall jederzeit verfügbar via Web & App mit differenzierten Zugangsberechtigungen

  • NEW BUSINESS

    optimize your things

    Optimierte Prozesse, datenbasierte neue Services & Business Modelle

DIGITIZE YOUR WORLDS TANKS COUNTERS OBJECTS

  • DIGITIZE

    make IoThings happen

    Digitalisierung nach Industrie 4.0 – lokal & global, flexibel dank Baukastenprinzip

  • SENSES

    gives senses to things

    Hochwertige Sensorik für Füllstände, Impulse, Drücke, Temperaturen, Feuchte, Bewegung, Alarmkontakte u.v.m.

  • TRANSMIT

    make things speak

    Vielfältige Übertragungstechnologien (RF, WLAN, GPRS, 4G/LTE, NB-IoT, SIGFOX, LoRa-WAN)

  • DISPLAYS

    see what things talk

    Visualisierung der Daten auf Display, Web & App

  • MONITOR

    manage things data

    Verwaltung & Analyse aller Daten via Web/Mobile App oder individuelles Datenmanagement

  • DATA LOGG

    connect up to 16 things

    Erfassen & verarbeiten von mehreren Funksendern & kabelgebundenen Sensoren mit globalem Datenmanagement

  • GLOBAL

    things data availability

    Alle wichtigen Daten überall jederzeit verfügbar via Web & App mit differenzierten Zugangsberechtigungen

  • NEW BUSINESS

    optimize your things

    Optimierte Prozesse, datenbasierte neue Services & Business Modelle

UNSERE TECHNOLOGIE
IST IHR VORTEIL

IoT-fähig: für globale Netzwerke mit Cellular 4G/3G/2G, LTE, NB-IoT, Sigfox, LoRa-WAN, Cat M1 und RF + WLAN

Transparent: Mobile App und Web App, sowie Plattform “RCT Monitor” für maximale Datentransparenz

Schnell: einfache Inbetriebnahme dank Plug & Play-Prinzip

Individuell: Datendarstellung über kundenspezifische Apps und Web-Apps und eigene ERP-Systeme

Modular: flexibel kombinierbar mit verschiedenen Sensoren für alle gängigen Tanks, Zähler und Objekte

Datensouverän: volle Kontrolle über eigene Daten (Amazon und Telekom Cloud)

Umweltfreundlich: Batteriepack selbstständig austauschbar plus Recycling-Fähigkeit

Flexibel: Device Engineering und Software-Entwicklung nach Wunsch

Industrietauglich: Mobile Gerätetechnik mit Industriestandard (vollvergossen)

Sicher und geprüft: Gerätetechnik nach ATEX, CE, ISO, QPS, TÜV u.a. zertifiziert

Wie lassen sich die digitalisierten Daten visualisieren und in eigene Systeme integrieren?

Eine einfache Möglichkeit, Tankinhalte im Blick zu behalten, ist eine Funk-Füllstandanzeige im Wohnbereich. Alle Daten, die global an den RCT Webserver übermittelt werden lassen sich komfortabel über die RCT Monitor App visualisieren und verarbeiten, sowie in verschiedenen Formaten Downloaden. Die IoT Plattform kann beliebig gebrandet oder nach kundenspezifischen Anforderungen programmiert werden. Um Daten in bestehende ERP-Systeme zu integrieren nutzen wir z. B. API-Schnittstellen oder entwickeln mit Ihnen gemeinsam ein individuelles Datenmanagement und Apps, die genau in Ihr Business passen.

Auf den Button klicken und mehr über unsere IOT Software erfahren!