Accessories
Battery Standard
Power for fast and safe commissioning of all RCT LEVELview Transmitters (Ex-Zone 1) | simply plug & play with Transmitter | replaceable at any time
Functionality
The required transmitter can be activated simply by plugging it together with the battery pack or deactivated by disconnecting it. The battery pack can be exchanged and replaced very easily at any time: Remove the transmitter from the used battery pack – wait 30 seconds – plug the transmitter onto the new battery pack. All programmed information of the transmitter is retained even in the de-energized state.
Features
Application: power supply for all RCT LEVELview Transmitters
Housing: robust, shock-proof, gas-tight, UV-resistant, fully encapsulated for Ex-Zone 1
Mounting: two magnets in the battery base for easy and quick mounting of the transmitter unit e.g. on the tank or tank cap
Construction: fully encapsulated, ATEX zone 1, intrinsically safe version (II 2 G Ex iB IIB T4 Gb), contains alkaline batteries
Lifetime: two to four years depending on transmission interval
Combinations
All LEVELview Transmitter:
- Transmitter LEVELview.PRO.LPG
- Transmitter LEVELview.PRO.OIL
- Transmitter LEVELview.PRO.AQUA
- Radio Transmitter LEVELview.BASIC.LPG
- Radio Transmitter LEVELview.BASIC.OIL
- Radio Transmitter LEVELview.BASIC.AQUA
Downloads
Data Logger REMOTE PROFI GSM
Intelligent remote monitoring of up to 16 measuring points via Mobile and Web App
With RCT Data logger, information of up to 16 different tanks, meters and objects can be collected and processed locally by Radio Transmitters and wired sensors. The measured data then can be made available worldwide via GPRS/4G or NB-IoT/Sigfox/LoRa for web-based data management via Mobile App and Web App.
Functionality
The data logger is a true all-rounder for simultaneous remote monitoring of various meters, tank levels, temperatures of the heating circuit, system malfunctions and much more. For example, the complete heating and building technology of a house, including external tanks, can be monitored remotely with one system. The data logger offers 16 channels for the acquisition of wired sensors and RCT Radio Transmitters (LEVELview.BASIC) in radio range up to 500 m. 4 meters with pulse output can be connected via cable. The data of all connected sensors and Radio Transmitters are stored in the data logger and sent to the RCT Webserver via GPRS/4G or NB-IoT/Sigfox/LoRa at regular intervals or when definable limits and alarms are reached. The measured values, meter readings, consumptions, alarms and system messages can be monitored at any time via the Internet using the Mobile App or Web App “RCT Monitor”. You receive a well-founded data basis for efficient energy controlling. Problems such as heating failure, unusual consumptions, temperature drop, empty tanks are detected at an early stage and enable fast targeted action and minimum downtimes.
Features
Application: 16 channels for receiving different transmitters type LEVELview.BASIC (868.45 Mhz) and connection of wired sensors/contacts e.g. temperature sensors, impulse counters, level sensors, pressure probes, fault contacts and many more; data forwarding to cloud server
Power supply: connector plug (2-pole) 230 V / 50Hz
Sensors/channels: 16 channels for receiving different transmitters type LEVELview.BASIC (868.45 Mhz) and connection of wired sensors/contacts
Connection terminals: 4 x 3-pole for analog inputs (0-24 V/4-20 mA); 4 x 4-pole for impulse counters and alarm contacts
Programming: initial configuration at the factory or via PC and RCT software “Config-Profi-8”; configuration adjustments possible at any time via RCT Web App
Data transmission: depending on version GPRS/4G/NB-IoT/Sigfox/LoRa
Mobile phone card: standard SIM card; mobile phone provider freely selectable or RCT contract card
Data reception: RCT Web Server (cloud), data management via Mobile and Web App or individual solution
Cyclic messages: transmission interval freely selectable; transmission of recorded measured values, counter impulses, battery status (Radio Transmitter), signal strength and system messages (last 24 measured values in one message)
Alarms: when definable limit values are reached (over/underrun), event/fault (switch contacts), empty battery (Radio Transmitter), further indirect alarms via the Web App e.g. untypical consumption
Housing: ABS plastic housing for wall mounting, IP 54, protective insulation (EU protection class II), for indoor use
Combinations
- Radio Transmitter LEVELview.BASIC.LPG
- Radio Transmitter LEVELview.BASIC.OIL
- Radio Transmitter LEVELview.BASIC.AQUA
- Pressure Probes
- Capacitive Sensors
- Antennas
Downloads
Magnetic Base Antenna
For LEVELview Transmitters | easy to attach directly to the tank and to metal surfaces | replaceable
Functionality
The magnetic base antenna is mounted upright on a metal surface. As a general rule: The larger the metal surface, the better the transmission power. For above-ground tanks, attach the antenna e.g. directly on the tank, for underground tanks outside the manhole e.g. on the manhole cover. Inside the manhole, the signal could be reduced by the metal enclosures. For unfavorable surrounding conditions, e.g. shielding elements such as reinforced concrete walls, further types and accessories are available (e.g. antenna cable extension, antenna that can be driven over).
Features
Cable length: 1.2 meters
Connection: screw connection (SMA socket)
Mounting: flexible by magnetic base, external
Types
- Transmitting Antenna 868 MHz Magnetic Base: Standard Antenna for Radio Transmitters LEVELview.BASIC
- Transmitting Antenna GSM Magnetic Base: Standard Antenna for Global Transmitters LEVELview.PRO
- Other versions: antenna cable extension, dipole antenna (traversable antenna), angle antenna
Combinations
All LEVELview Transmitter:
- Transmitter LEVELview.PRO.LPG
- Transmitter LEVELview.PRO.OIL
- Transmitter LEVELview.PRO.AQUA
- Radio Transmitter LEVELview.BASIC.LPG
- Radio Transmitter LEVELview.BASIC.OIL
- Radio Transmitter LEVELview.BASIC.AQUA